01
Epoxy cem TX A+B+C
Three-component epoxy-cement primer specifically for wet substrates.
Waterproofing sheathing under tiles for terraces and balconies.
Single-component cement waterproofing membrane with high elasticity performance
(down to temperatures below -20 °C).
01
Three-component epoxy-cement primer specifically for wet substrates.
02
Single-component cement waterproofing membrane.
03
C2TE-S1 certified high-performance deformable cementitious adhesive.
04
Malta cementizia impermeabile in 22 colori per stuccature di fughe da 0 a 8 mm di larghezza su pavimentazioni civili (ceramica, gres, clinker, bicottura, monocottura, cotto, ecc).
Cement waterproofing sheath for swimming pools prior to laying ceramic tiles.
Single-component cement waterproofing membrane with high elasticity performance (down to temperatures below -20°C).
01
Alkali-resistant elastic tape, coated with non-woven polypropylene fabric.
02
Elastic, single-component cement sheathing for waterproofing and protecting concrete, UV-resistant, UNI EN 1504-2 and UNI EN 14891 CMO2P certified.
03
C2TE-S1 certified high-performance deformable cementitious adhesive.
Single-component elastic cement sheathing for waterproofing water cisterns
Single-component cement waterproofing membrane with high elasticity performance (down to temperatures below -20°C).
01
Alkali-resistant elastic tape, coated with non-woven polypropylene fabric.
02
Elastic, single-component cement sheathing for waterproofing and protecting concrete, UV-resistant, certified to UNI EN 1504-2 and UNI EN 14891 CMO2P (-20 °C), UV-resistant and suitable for contact with drinking water.
Fibred and coloured elastomeric waterproofing sheath.
01
Licalastic Scud acts as a waterproofing bonding layer prior to the installation of new screeds, tile adhesives in general.
02
Technological reinforcement fabric, suitable for reinforcing liquid solvent-based polyurethane resin waterproofers.
03
Licalastic Scud should be applied in two coats in cross coats, always ensuring that the last coat is perfectly dry and solid.
04
Once licalastic 150 PU has cured, proceed with the application of C2TE-S1 certified high-performance deformable cementitious adhesive.
Liquid membrane with waterproofing and hydro-hardening solvent.
01
Three-component epoxy-cement primer specifically for wet substrates.
02
Self-adhesive elastic waterproofing tape based on butyl rubber and non-woven polypropylene fabric.
03
Single-component solvent-based liquid waterproofing membrane.
04
UV-resistant two-component aliphatic polyurethane coating.