Line for the restoration, repair and reinforcement of reinforced concrete structures.
Line for the protection of concrete structures
Line for the consolidation and reinforcement of structures with composite materials
Laying of porcelain stoneware on new floor.
01
C2TE high-performance cement-based adhesive for thin-layer bonding of stone and ceramics.
Recommended applications:
Bonding of mineral coverings of all kinds: ceramic, terracotta, stoneware, single and double-fired, clinker, etc. Bonding of insulating panels (EPS, extruded, cork, etc.).
02
Waterproof cement mortar in 22 colours for grouting joints from 0 to 8 mm.
It is particularly suitable for
grouting 0 to 8 mm wide joints on civil flooring (ceramic, stoneware, clinker, double-fired, single-fired, terracotta, etc.).
Laying of large format ceramics on new floor.
01
Class C2TE cement-based adhesive according to UNI EN 12004, with no vertical slip, extended open time, specifically for thin-layer bonding of ceramic tiles and stone material.
Recommended applications:
Bonding of mineral coverings of all kinds: ceramic, terracotta, stoneware, single and double-fired, clinker, etc.
02
Waterproof cement grout in 22 colours for grouting joints from 0 to 8 mm.
Waterproof laying of marble in wet rooms, bathrooms and showers.
01
Protect and waterproof with a single-component protective and waterproofing cement sheath.
02
Laying marble slabs with C2TE S1 high-performance, deformable cement adhesive for thin-layer bonding of stone and ceramics.
03
Installation system on radiant floor.
01
After assessing all aspects suitable for the underfloor heating system, use a quick self-levelling cement mortar.
02
C2TE-S1 certified high-performance deformable cementitious adhesive.
03
Waterproof cement grout in 22 colours for grouting joints from 0 to 8 mm.
